Bambu Lab Carbon Fibre Surface Sheet, A1 mini

The Carbon Fibre Surface Sheet from Bambu Lab gives your printed objects a unique surface with a carbon fibre-like structure. The rough texture makes your prints appear classy and high-quality.

How does it work?

You place the carbon fibre texture sheet on the magnetic base plate, install it according to the instructions in the YouTube video* (below the text) and then start your print. The structure of the sheet is transferred to the first layer of your model, creating a unique 3D effect.

*The STL file for the “Fixture Tool” shown in the video can be found here.

Useful tips:

• The films with 3D effects are not attached to the base plate and must be installed accordingly for use. The films can be attached to both sides of the plate. The surface must be dry and clean before application!
• Bambu Lab recommends applying the effect foils only to the official Bambu Lab steel plate.
• The effect films can also be installed on the Bambu Engineering Plate. Before doing this, you should make sure that the original plate has been removed and all adhesive residue has been removed.
• When using Bambu Lab effect sheets, select the plate type "Smooth PEI/High Temp Plate". Carefully follow the recommended heat bed settings if you decide to use the Bambu 3D effect sheets. Bambu Lab recommends using PLA and TPU filament.
• In order for the 3D effects to be transferred to the print models, the surface must always be clean! Greasy traces make the patterns disappear. Tip: Warm water and detergent are ideal for cleaning.

Recommended settings:

Included in delivery:

• 2 x Carbon Fibre Sheets