Snapmaker Snapmaker Ray including Enclosure

Built to industrial quality, the Snapmaker Ray is Snapmaker's first standalone laser engraver and laser cutter, available with your choice of either 20W or 40W laser power. With Air Assist support, a massive 400 x 600 mm working area and a maximum working speed of 500 mm/s, you not only get ease of use, performance and precision in one, but the state-of-the-art device also supports over 20 materials for engraving and more than 10 to cut!

Features at a glance:

• Working area of ​​400 x 600 mm,
• Working speed of 500 mm/s,
• Precision-engineered industrial-grade linear rails,
• Laser module with 20W or 40W laser power and modern laser beam combination technology,
• Air Assist for better quality,
• Class 1 security enclosure,
• Snapmaker Luban software with ready-to-use templates.

Max. working speed of 500 mm/s

The maximum working speed of the Snapmaker Ray is 500 mm/s, which makes the laser cutter and engraver a real workhorse!

Working area of ​​400 × 600 mm

With a working area of ​​400 × 600 mm, even large projects such as cards, furniture models or door signs can be implemented with ease.

Thanks to a cylindrical base that can be attached to both the device itself and the laser bed, projects up to 160 mm thick can be lasered. Not even engraving thick objects like guitars poses a problem for the device.

20W or would you prefer 40W laser power?

Both laser modules (20W/40W) are equipped with eight laser diodes. In the first step, the built-in laser beam shapers compress the laser spot of each individual diode. The laser beams from all eight laser diodes are then combined using the latest laser beam combination technology. This not only results in a higher output power but also a higher energy density.

Precision-engineered linear rails

Snapmaker Ray features durable and robust industrial-grade linear rails that ensure stability and precision even during high-speed movements.

Smart Air Assist

Snapmaker Ray is equipped with intelligent Air Assist to improve the quality of your work. Air Assist has the following tasks:

1. Air is pumped into the Air Assist.
2. Fumes are blown away, preventing charring.
3. The laser lens is kept clean.
4. Vapours are removed through the grid table.

Class 1 safety enclosure

Snapmaker Ray comes with a safety enclosure that can reduce laser hazards from Class 4 to Class 1 as well as exhaust any smoke and dust with its exhaust fan.

Thanks to a door detection sensor on the housing, the laser process is stopped immediately and automatically after the door is opened.

Snapmaker Luban Software

With the Luban software developed by Snapmaker, you have the opportunity to always keep an eye on the configuration of your work processes. With different modes and preset parameters, your engraving and laser-cutting projects can be completed in no time.

Snapmaker also makes an extensive library of more than 1000 ready-to-use templates of shapes, patterns and symbols freely available.

Other features:

• Easy focusing with Focus Lever
• Aligning the order with crosshairs
• Laser protective shield
• Orientation Detection
• Overheating protection
• Built-in quick change mechanism

Included:

► Ray 20W/40W Laser Engraver and Cutter:

• 1 x 20W/40W laser module
• 1 x Power Module
• 1 x Air Assist Pump
• 1 x Air Tube
• 8 x Cylindrical Base
• 4 x Foot Bracket
• 1 x M8 Air Tube Connector
• 1 x M5 Air Tube Connector
• 2 x Cable Ties
• 1 x x-axis linear module
• 2 x y-axis linear module
• 14 x Cable Clip
• 1 x Quick-swap toolhead holder
• 1 x Cable Collector
• 1 x USB Cable
• 1 x Toolhead Cable
• 1 x Right Linear Module Connector
• 1 x Left linear module connection
• 2 x Foot Connectors
• 1 x WiFi Antenna
• 2 x Security Keys
• 1 x Laser Engraving and Cutting Platform
• 1 x AC Power Cable
• 1 x microSD card
• 1 x Basswood Plywood
• 1 x Laser Safety Glasses
• 5 x Cotton Swabs
• 1 x Laser Lens Protector
• 36 x M5x12 screw
• 5 x M5x16 screws
• 1 x H3.0 Hex Key
• 1 x microSD card reader

► Security housing:

• 1 x Housing Door
• 2 x front/back panels
• 1 x Left Side Panel
• 1 x Right Side Panel
• 1 x long bar-1 (with air inlets)
• 1 x long bar-3 (with housing converter)
• 1 x long beam-4 (with hinges)
• 1 x long bar-2 (with Hall switch)
• 5 x M4 Wing Nut
• 5 x Exhaust Fan Guard
• 1 x Exhaust Fan
• 8 x Profile connectors
• 1 x Snap Socket
• 1 x Hose Connector
• 1 x Housing Cable
• 1 x Sealing Strip
• 4 x Column
• 2 x short bars with LED strips
• 2 x short bars
• 9 x seal plugs
• 1 x H3.0 Hex Key
• 1 x H2.5 Hex Key
• 1 x hose clamp
• 1 x Hose
• 18 x M5x30 screw
• 5 x M4x40 screws
• 18 x M5x12 screw
• 4 x M4x12 screws
• 1 x Cable Catch Strip

Technical specifications: