BuildTak 3D Print Surface, Ø 165 mm
For perfect adhesion
$5.51 $7.87 -30%
(All prices excl. VAT. - Excludes delivery costs)
Features & Advantages
- Perfect adhesion
- Optimal bond
- Reusable
- No more distortions
Item no.: BT-BT65DIA, Content: 1 pc, EAN: n/a
Product information & technical details
- Item no.: BT-BT65DIA
- Manufacturer No.: BT65DIA
- Manufacturer: BuildTak
- Content: 1 pc
- Product type: 3D Printer Accessories, Build Surfaces
Description
BuildTak is a thin, durable plastic film that adheres to the printing bed of FDM / FFM 3D printers.
It provides a perfect surface and replaces the traditional blue tape or Kapton tape.
BuildTak consists of high-quality, heat resistant raw materials and allows for clean and easy removal of the component.
The surface of the component BuildTak adheres the component to the surface, minimizing distortions.
BuildTak offers the following advantages:
- Works great with PLA, ABS, Wood, PET, flexible filaments, and more ...
- No pre-treatment required (applying hairspray, etc.)
- Easy installation and clean detachment with no adhesive residue
- BuildTak is very durable
- Optimal bond between print object and surface
The patent heat-resistant composition was developed to withstand the typical temperatures of heated beds (110-125 °C).
More information
When using the BuildTak Print Surface the board must be calibrated again. The components may adhere to the print bed if the distance is not correct. Please find the instructional video below. BuildTak recommends using a nozzle height of about 0.2 to 0.25 mm. If the first layer does not adhere well, gradually reduce the distance.
Once the correct distance is found, you can use the BuildTak printing surface for hundreds of hours.
Downloads
Product videos:
Questions & Answers about BuildTak 3D Print Surface
Customer Reviews
10 English reviews written for BuildTak 3D Print Surface
148 customer reviews in all languages
| 5 stars | | 146 | (59%) |
|---|---|---|---|
| 4 stars | | 52 | (21%) |
| 3 stars | | 22 | (8%) |
| 2 stars | | 10 | (4%) |
| 1 Stars | | 16 | (6%) |
246 reviews
10 customer reviews in English
148 customer reviews in all languages
-
Oleg
October 14 2022
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Single use
Rated with 1 out of 5 stars.
So I installed it on top of my worn out ultrabase, and calibrated to 0.2mm. as instructed. And this is what I found out.
No, PLA prints don't pop off when cooled down.
No, it isn't durable when you have knock a metal spatula with a hammer just to get the said PLA print off, alongside with some of the buildplate material fused to the first layer. (by the way, it can get scratched if you use a feeler gauge for calibration)
No, it does require pre-treatment in form of a buildplate adhesive as separator(!!!).
And even the latter didn't help when I got to printing PETG. Some parts of the first layer fused with the buildplate permamently.
As a result, surface texture is ruined in a single evening of printing.Was this rating helpful? (4) (2)
-
Rostislav
November 17 2022
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Sticky in a good way
Rated with 5 out of 5 stars.
I don’t even bother buying glue, because it’s sticks to it completely fine, without the need of one!
Was this rating helpful? (3) (2)
-
cB
June 24 2022
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Works quite well
Rated with 5 out of 5 stars.
It works great for my machine
Was this rating helpful? (3) (0)
-
Akin
July 20 2023
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Poor adhesive on 609mmx609mm
Rated with 1 out of 5 stars.
I have a modix 120x and my build surface is 1200mmx600mmx600mm and both the buildtaks at 609mmx609mm after heating the bed to 60 degrees started to bubble and corners started to lift. The adhesive property on the bigger sizes is very poor.
Was this rating helpful? (0) (0)
-
Barrie Lever
June 04 2020
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. BuildTak 3D Print surface
Rated with 5 out of 5 stars.
A nice product that works well, I am using it on my Dremel 3D20 with good results.
Was this rating helpful? (0) (0)
Related products
Customers also bought
Magazine Articles:
-
Delivery in 3 business days.
More than 10.050 products
We deliver worldwide to
more than 40 countriesSecure payments
with SSL encryption technology
Because of the Prusa's unique design (like those 2 screws at the back of the bed) it is difficult to get the perfect build surface for it. The Buildtak flexplate has a spring steel sheet with which PEI or textured surface can be attached.