Creality Ender 3 S1

The Creality Ender 3 S1 is an innovative FDM printer with numerous features, which has preset interfaces for LED light and laser engraving.

Main features of the Ender 3 S1

• "Sprite" direct dual gear extruder for high filament compatibility
• 220 x 220 x 270 mm build area
• Max. Nozzle temperature: 260 ° C
• Max. Heating bed temperature: 100 ° C
• CR-Touch Automatic bed levelling for easier levelling
• 32-bit silent mainboard for silent printing
• Preset interface for laser engraving and LED light
• Dual Z-axis for more safety and stability
• 96% pre-assembled for quick assembly
• Print plate made of PC spring steel for good adhesion and easy detachment of the model
• 4.3 inch LCD screen with brand new UI interface for easy operation

"Sprite" direct dual gear extruder for high filament compatibility

The "Sprite" direct dual gear extruder developed by Creality has two chrome steel gears that are switched with a gear ratio of 1: 3.5. With a force of up to 80N, the extruder achieves a smooth and even feed and extrusion of filaments without slipping and is ideal for printing flexible filaments such as TPU. With a weight of only 210g, the "Sprite" is lighter than other direct extruders and is characterised by lower inertia and more precise positioning.

CR-Touch automatic levelling

The CR-Touch 16-point automatic bed-levelling technology saves you from the effort of manual levelling. The intelligent levelling system automatically compensates for the print height of various points on the heated bed.

High-precision dual Z-axis for higher printing precision

With a dual Z-axis leadscrew & Z-axis dual-motor design, the Ender 3 S1 works smoother and more in sync, reducing lines and edges on the sides of your print to improve print quality.

Removable print surface made of PC spring steel

The innovative printing platform is a combination of a PC coating, a spring steel plate and a magnetic plate that immediately adheres to the surface when it is detached. The PC coating ensures good adhesion and easy removal of the printed models by bending the surface.

Ultra-quiet 32-bit motherboard

The brand new 32-bit silent motherboard runs at low decibel levels (below 50dB) and significantly reduces noise, so you can enjoy 3D printing.

Convenient operation & new user interface

The 4.3 inch LCD button screen has a brand new user interface for easy interaction. When inactive, the screen is automatically dimmed for 5 minutes to save energy and protect the environment.

Resume printing function and filament sensor

The Ender 3 S1 has the function to detect filament running out or breakage / loss of performance and to continue printing after restoration. By accurately recording the print data at the time of a power failure / filament run-out or break, filament and time can be saved.

Pre-assembled 3D printer - Easy assembly in 6 steps

96% of the printer housing is pre-installed, making it easy to assemble in just 6 steps and allowing easy and straightforward maintenance of the printer.

Existing interface for laser engraving and LED light

With preset interfaces for laser engraving and LED light, the Ender 3 S1 offers you more options.

Note: Laser engraving and LED light must be purchased separately.

Belt tensioner with button

The belt tensioner is an easy-to-use tool that prevents problems such as layer shifting due to insufficient strength.

Marlin 2.1.2 Input Shaping

Want to push your printer to the limit? Then you can upgrade this printer with the latest version of Marlin firmware, which includes input shaping - a feature that smooths out unwanted vibrations that can cause unsightly ringing and other imperfections in your print, thereby limiting your print speed. Upgrading to Marlin firmware can reduce your print time by around 30%. Marlin firmware is easy to install and completely free!

You can find the latest Marlin update here, along with configuration files for your printer and instructions for installing and changing the firmware. You can find our article on high-speed printing here.