DIAMANT Polymer dichtol AM Spray, 500 ml

Name: DIAMANT Polymer dichtol AM Spray, 500 ml
Brand: DIAMANT Polymer
SKU: DIA-2568
Price: 35.20 USD
Availability: InStock

Polymer formulation for impregnation of leaky components & small pores

Version:

Features & Advantages

Practical spray can
Special polymer formulation
Seals even the smallest pores
High pressure resistance
Temporary protection from corrosion & for transport

Item no.: DIA-2568, Content: 500 ml, EAN: n/a

Product information & technical details

Item no.: DIA-2568
Manufacturer No.: 2568
Manufacturer: DIAMANT Polymer
Content: 500 ml
Product type: 3D Printer Accessories, Post-processing

Description

Dichtol AM Spray is a ready-to-use product with a special polymer formulation that impregnates leaking components and seals small pores of 0 to 0.1 mm. It exhibits high pressure resistance and provides temporary protection from corrosion or during transport.

Suitable for:

capillary-active deep impregnation of micropores, hairline cracks and porosities,
targeted serial impregnation,
single-point impregnation of large components,

Preparation and application:

Before application, the pores to be sealed must be thoroughly cleaned of dirt residues and other undesirable substances.

Apply the dichtol AM Spray four times at 1-minute intervals and keep moist for at least 5 minutes to allow the product to penetrate the pores deeply. Note that the temperature of the object to be impregnated should not exceed 40°C. The penetration of the polymer cannot be guaranteed at higher temperatures.

The impregnating product dries out completely after a short time.

Storage: Store the unopened bottle in a cool and dry place (+5°C to 30°C).

Shelf life: 5 years.

Hazard and precautionary statements

Signal word: Danger

Precautionary statements:

P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 - Do not spray on an open flame or other ignition source.
P233 - Keep container tightly closed.
P251 - Do not pierce or burn, even after use.
P261 - Avoid breathing dust/fume/gas/mist/vapours/spray.
P264 - Wash hands thoroughly after handling.
P271 - Use only outdoors or in a well-ventilated area.
P280 - Wear protective gloves/protective clothing/eye protection/face protection.
P312 - Call a POISON CENTRE/doctor if you feel unwell.
P302+P352 - IF ON SKIN: Wash with plenty of water/soap
P304+P340 - IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P301+P310 - If swallowed: Contact the nearest poison control centre or doctor immediately.
P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308+P313 - IF exposed or concerned: Get medical advice/ attention.
P333+P313 - If skin irritation or rash occurs: Get medical advice/attention.
P370+P378 - In case of fire: Use dry extinguishing power or sand to extinguish.
P501 - Dispose of contents/container at an industrial incineration plant.