Elegoo UNO R3 Ultimate Starter Kit

Understanding electronics is not that difficult! Immerse yourself in this fascinating world and surprise friends, family and electronics-loving children with the UNO R3 Ultimate Starter Kit from Elegoo! Learn, experiment and gain skills you didn't even know you could have! Thanks to detailed and extensive instructions, the kit is also suitable for inexperienced hobbyists and children who want to assemble this sensor kit step by step and indulge in the world of electronics.

The starter kit consists of all necessary components and parts, which are robust and manufactured to the highest quality! The main parts in the kit - UNO R3 Controller Board as well as Expansion Board - are compatible with Arduino! The variety of parts included allows for easy implementation of both simple and complex projects.

Features:

► 74HC595 chip

The UNO R3 board is equipped with a 74HC595 chip. This serial-to-parallel converter has 8 outputs and 3 inputs, through which data can be fed in bit by bit via so-called "Data" and "Clock" pins (memory locations as 1 or 0).

LCD1602 display module

The compact LCD1602 module is a white-on-blue LED backlight that has a 2 x 16 character display to display text.

DC motors and L293D chip

The starter kit shows you how a small stepper motor can be controlled with a UNO R3 controller board and a L293D transistor.

The L293D is a quad half-H high-current driver that delivers bi-directional drive currents up to 1A at voltages from 4.5V to 36V. By designating most of the pins of the versatile L293D chip on its right side to control a second motor, it can control two motors independently. Just practical, isn't it?

Included:

• 5 x white LEDs
• 5 x yellow LEDs
• 5 x blue LEDs
• 5 x Red LEDs
• 5 x green LEDs
• 1 x RGB LED
• 5 x 22pf ceramic capacitor
• 5 x 104 ceramic capacitor
• 2 x Photoresistor
• 1 x Thermistor
• 5 x Diode Rectifiers (1N4007)
• 2 x Electrolytic Capacitor (10UF 50V)
• 2 x Electrolytic Capacitor (100UF 50V)
• 5 x NPN transistor (PN2222)
• 5 x NPN Transistor (S8050)
• 1 x Toggle Switch
• 5 x small buttons
• 1 x 1-digit 7-segment display
• 1 x 4-digit 7-segment display
• 1 x Sound Sensor Module
• 1 x LCD1602 Module with Pin Header
• 1 x ICL293D
• 1 x IC 74HC595
• 1 x active buzzer
• 1 x Passive Buzzer
• 1 x RTC Module
• 1 x DHT11 Temperature and Humidity Module
• 2 x potentiometers
• 1 x Encoder Module
• 1 x Joystick Module
• 1 x Keyboard Module
• 1 x 5V Relay
• 1 x Infrared Receiver Module
• 1 x UNO R3 Controller Board
• 1 x breadboard
• 1 x Servo Motor (SG90)
• 1 x Stepper Motor
• 1 x ULN2003 Stepper Motor Driver Board
• 1 x Prototype Extension
• 1 x power supply module (for voltages below 9 V!)
• 1 x HC-SR501 PIR Motion Sensor
• 1 x Ultrasonic Sensor
• 1 x GY-521 Module
• 1 x 3V-130 DC Motor
• 1 x MAX7219 module
• 1 x remote control
• 1 x 9V 1A Power Adapter
• 1 x 65 jumper wire
• 1 x Water Lever Sensor
• 1 x USB Cable
• 1 x 9V battery with DC connector
• 1 x RC522 RFID Module
• 10 x Resistor (10R)
• 10 x Resistor (100R)
• 30 x Resistor (220R)
• 10 x Resistor (330R)
• 10 x Resistors (1K)
• 10 x Resistors (2K)
• 10 x Resistor (5K1)
• 10 x Resistors (10K)
• 10 x Resistors (100K)
• 10 x Resistor (1M)
• 20 x Female-to-Male DuPont Wire
• 1 x fan