Fiberthree F3 PA-CF Pro

F3 PA-CF Pro is a technical filament made of polyamide, which has been specially modified for 3D printing in FFF with additional carbon fibres. The carbon fibres reduce shrinkage and warping to a high degree.

Material properties

The material shows excellent strength with remaining impact strength with very little tendency to warp and good layer adhesion. Due to the good heat and load resistance, this material is recommended for all high-strength parts. The printed parts show a very attractive surface texture in matt black. It is a very stiff filament that can break only at very tight flexing.

With thin walls, printed components can become very flexible under the influence of moisture, which is why F3 PA-CF Lite is recommended for these applications.

In contrast to F3 PA-CF Lite, this material has increased strength and easier printability. However, the sensitivity to moisture when printing is also higher.

Processing

Wear-resistant nozzles are strongly recommended for processing the material.

The material must be stored dry in order to achieve reliable printing results under all conditions.