FlashForge Guider 3 Plus

The Flashforge Guider 3 Plus is an intelligent FDM 3D printer that impresses with high professionalism and quality, high printing speeds and quiet operation. Its smart management system makes this ingenious printer interesting not only for small companies, universities and laboratories; it is also increasingly used in research, development and design.

CoreXY structure for high-speed and quiet operation

The practical CoreXY structure of the Guider 3 Plus ensures exceptional print speeds of up to 250 mm/s. The printer is characterised by quiet operation and a noise level of less than 50 dB.

High-quality prints and incredible stability

The printer is equipped with a double Z-axis ball screw. This ensures that the positioning of the individual layers is correct when printing and that movements are even. This creates smooth surfaces that are characterised by outstanding quality.

The printer itself has a huge build volume of 350 x 350 x 600 mm. Its large platform can support a weight of up to 30 kg! A 16 mm Z-axis guide and 16 mm TBI ball screws on both sides provide additional stability during printing. This means that even larger models can be printed in excellent quality.

Closed filament chambers with desiccant

On the back of the printer are two sealed filament chambers with a silicate desiccant. This ensures that filament spools are stored in a dry environment both during the printing process and when idle.

Each of the chambers can store 1 kg spools. Because the chambers have a hygrometer, the humidity can not only be measured at all times but also displayed visually. This further facilitates worry-free storage of the filaments in a dry environment.

HEPA 13 air filtration system

Harmful substances, dust and particles can be produced during printing. Thanks to an effective HEPA 13 air filter system, these are filtered and the resulting gas is discharged through a pipe leading to the outside.

High compatibility with filaments

► PLA, ABS, HIPS, Nylon, PETG, PC, ASA

► Glass fibre reinforced, carbon fibre reinforced

Note: Glass fibre-reinforced and carbon fibre-reinforced filaments must be used with a high-strength nozzle.

Thanks to the open configuration, filaments from other manufacturers are also supported.

Remote control and monitoring

The Guider 3 Plus can be controlled and monitored in real-time via FlashPrint 5 and FlashCloud.