6 English reviews written for FLSUN Super Racer
54 customer reviews in all languages
| 5 stars | | 71 | (78%) |
|---|---|---|---|
| 4 stars | | 14 | (15%) |
| 3 stars | | 2 | (2%) |
| 2 stars | | 1 | (1%) |
| 1 Stars | | 2 | (2%) |
Filter reviews:
-
Muppet
January 31 2024
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. -
JohnV
November 25 2022
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. FLSUN Racer
Rated with 5 out of 5 stars.
I like their delta printers: fast, reliable, precise. With my new Speeder Pad, I am now running klipper even faster! I like the easy building, the automatic levelling. Thanks the FLSUN are my 2best printers up to now 5I have 4 including a Biqu and an Anet). I really recommend FLSUN for all types of makers!
Was this rating helpful? (6) (0)
-
Stuart
September 05 2022
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Amazing
Rated with 5 out of 5 stars.
Absolutely blown away with the quality and speed of this printer. Great service and price from 3D Jake.
Was this rating helpful? (1) (0)
-
Best for quick prints and prototyping
Rated with 4 out of 5 stars.
Bought it soon after release, very impressed with speed and overall construction. Great platform for beginners and people that just want to use occasionally a 3d printer but if you want detail and quality for prints some improvements are needed.
Four stars because of the poor extruder that comes with it, glass bed is good but big prints stick to well and hard to remove, the part cooling needs some modifications and has the tendency to hit the part after a couple of layer printed.
Extruder: has way to hard grip, makes too much noise on retraction and the feeding system not that accurate. Reliability of using it around 60-70%. I will upgrade it to a more efficient extruder in the future.
Glass Bed: prints stick well on it, but on bigger surfaces it's hard to remove from the build plate even when using glue to create a secondary contact surface. Got a lot of warping with PLA on bigger print. I will upgrade it with a PEI Magnetic Surface in the future.
Cooling System: not that efficient for the speed it has, first upgrade done printed other cooling ducts and now I want to upgrade the blower fans to 5015 to help with faster speeds.
Hitting the printed part: from the first print until now, the printer scratches the part at a specific Z height(10-15 layers printed). I tried a lot of slicer settings but not helped. Recently I stubbled upon a post where the steps set for the X,Y,Z needs to be increased just a little to fix this. Did not tested it yet, but if you encountered the same problem let me know.
This is my experience with the printer for 3 months now.Was this rating helpful? (3) (0)
-
Marcin
July 29 2022
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Awesomeness
Rated with 5 out of 5 stars.
Prints fast out of the box and stuff sticks to the bed. This is my second printer, the first one being ender 5 plus, and SR is something I always wanted my E5P - reliable, performant and easy to debug. The factory UI for Marlin was good, the only caveat is the annoyingly loud speaker which beeps every time I press something on the screen. The printer is easy to mod, installing Klipper went easy (despite it being the first time I played with Klipper). The craftsmanship is great, though you can expect to see some imperfections, but nothing that’s affecting the print quality. It’s not the quietest printer - the extruder and duct fans make the most of noise (mod it with 5015 fans and bondtech lgx extruder to make it quiet). If I were to buy next printer, I’d definitely go with V400 - it’s basically a super racer with all necessary mods already pre installed.
Was this rating helpful? (5) (0)
-
Ian Walton
February 03 2022
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. FLsun Superracer Review
Rated with 5 out of 5 stars.
Bought this as an upgrade to the Flsun Q5, i wanted alittle more speed, a little more build area. Was not dissapointed, went together like a dream, done in under an hour, am in a wheelchair, so any able bodied person will be able to do it in under an hour easy. calibrated first time, set z gap and off it went, never missed a beat since.
Was this rating helpful? (18) (1)
Magazine Articles:
Discover 3DJake:
-
Delivery in 3 business days.
More than 10.550 products
We deliver worldwide to
more than 40 countriesSecure payments
with SSL encryption technology
Good mid-range printer
Rated with 4 out of 5 stars.
First of all, its cheaper now than when i bought mine! ouch.
Apart from this, its a very good machine. Massive step up from the average bed slinger. The layer adhesion suffers at higher print speeds with some filament. Most of my prints are done around 80mm/s wall speed with fans at half speed, to ensure good adhesion. You can still enjoy the quick travel speeds which will seriously improve your print times in most cases above a basic printer.
The main reason i got this is i saw someone else using this, the quality of print when making single-wall parts for RC aircraft. The requirements of this way of printing is quite different to standard multi-wall plus infill. The way this printer can stack single walls up with very little deviation is superb. Agree with others that the extruder is poor and will be replaced in due course. I may upgrade to the V400 to get the larger print area but for most of my prints, the high speed doesn't achieve much.
Was this rating helpful? (1) (0)