E3D SuperVolcano Hardened Steel Nozzle - 1.75 mm

SuperVolcano Hardened Steel nozzle

If you're doing 3D printing with carbon fibre, filled PLA, or glow-in-the-dark filament, this is the nozzle you need! Filaments filled with carbon cause quick and significant damage to standard nozzles. These incredibly wear-resistant nozzles are designed for the toughest filaments on the market.

Advantages

Paying a little more for a hardened, wear-resistant nozzle is both practical and economical. This also saves a lot of time because you do not have to constantly replace worn nozzles. With this nozzle, you are ready for future materials. These nozzles should be able to handle almost anything that material manufacturers think about next.

Appearance

Due to the thermal and chemical treatment of the nozzle, they have a somewhat dark, sometimes uneven-looking colour and surface texture, and there may be a small amount of residue on the nozzles despite the final cleaning process. The colour deviation is normal and does not affect the function. Residues remaining on the nozzle are quickly washed away in the first millimetres of the extrusion, especially if you rinse them with an abrasive filament!

SuperVolcano nozzle

SuperVolcano nozzles are super-fast nozzles for use with the SuperVolcano block and packs for printing extremely large layer heights at extremely high flow rates. SuperVolcano nozzles have even longer heated melting zones for ultimate melting speeds. The internal geometry has been carefully designed to optimise flow and throughput and to ensure that the nozzle tip is the correct size to flatten particularly wide print marks.