Vision Miner Nano Polymer Adhesive, 120 ml
The unbeatable adhesive for high-temperature applications
Features & Advantages
- Especially for high-temperature materials
- Compatible with most surfaces
- Easy cleaning
- Very good adhesion
Item no.: VM-00850003679174, Content: 120 ml, EAN: 850003679174
Product information & technical details
- Item no.: VM-00850003679174
- Manufacturer No.: 00850003679174
- Manufacturer: Vision Miner
- Content: 120 ml
- Product type: 3D Printer Accessories
Description
Say goodbye to warping!
It is well known how demanding the printing of high-temperature materials can be. There is nothing worse than starting a print job and then realising that your printer has been extruding with a shifted base layer for the last few hours. This is exactly why this adhesive was developed, which offers the ultimate solution to avoid such situations.
This adhesive was specially developed for PEEK, Ultem ™, PPSU and other high-performance FDM polymers and is suitable for almost all filaments such as nylon, ABS, PLA, PETG, PEI, PSU.
It also works on various building surfaces:
- Borosilicate glass
- Ceramic glass
- Circuit board
- Carbon fibre
- Fibreglass
- Aluminium
- BuildTak ™
- PEI and more
The properties:
- Developed for PEEK, PEI and high-temperature materials
- Works on many surfaces (glass, carbon, resins, etc.)
- Easy to clean and reapply
- Works with normal materials like ABS, PLA and nylon
- Made from safe, organic compounds
For PLA and PETG you can use the same coating more than 50 times and the content of each bottle has more than 300 coatings for an area of 17 x 17 cm.
Hazard and precautionary statements
Signal word: Danger
Precautionary statements:
- P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P233 - Keep container tightly closed.
- P240 - Ground and bond container and receiving equipment.
- P241 - Use explosion-proof electrical/ventilating/lighting equipment.
- P243 - Take action to prevent static discharges.
- P260 - Do not breathe dust/fume/gas/mist/vapours/spray.
- P261 - Avoid breathing dust/fume/gas/mist/vapours/spray.
- P264 - Wash hands thoroughly after handling.
- P280 - Wear protective gloves/protective clothing/eye protection/face protection.
- P312 - Call a POISON CENTRE/doctor if you feel unwell.
- P360 - Rinse immediately contaminated clothing and skin with plenty of water before removing clothes.
- P304+P340 - IF INHALED: Remove person to fresh air and keep comfortable for breathing.
- P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P337+P313 - If eye irritation persists: Get medical advice/attention.
- P403 - Store in a well-ventilated place.
Hazard statements:
- H225 - Highly flammable liquid and vapour
- H319 - Causes serious eye irritation
- H336 - May cause drowsiness or dizziness
Downloads
Product videos:
Nano Polymer Adhesive
Questions & Answers about Vision Miner Nano Polymer Adhesive
Customer Reviews
2 English reviews written for Vision Miner Nano Polymer Adhesive
9 customer reviews in all languages
| 5 stars | | 13 | (72%) |
|---|---|---|---|
| 4 stars | | 0 | (0%) |
| 3 stars | | 1 | (5%) |
| 2 stars | | 0 | (0%) |
| 1 Stars | | 4 | (22%) |
18 reviews
2 customer reviews in English
9 customer reviews in all languages
-
Yury
March 15 2024
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Doesn't work for PP
Rated with 1 out of 5 stars.
Generally, for PP filament it is a waste of money. Adgesion is worse with adhesive than without it. Without "Vision Miner Nano Polymer Adhesive" I have 50% of successful prints. Using it - 100% waste of time and material
Was this rating helpful? (0) (2)
-
VLADIMIR RAKAMARIC
March 13 2022
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Nano Polymer Adhesive
Rated with 5 out of 5 stars.
THANK YOU
Was this rating helpful? (0) (2)
Related products
Customers also bought
Magazine Articles:
- 3D Printer Nozzle Guide
- YouTube Episode: Beyond 3D Printing: T-Shirts, Decals & More on the Silhouette Cameo 5
- YouTube Episode: Meet the Maker with the Masterminds behind Kamui Cosplay
- The new BIQU B1 - Competition for the Ender 3?
- YouTube Episode: From Physical to Digital: Budget 3D Scanner Battle Royale!
Discover 3DJake:
-
Delivery in 3 business days.
More than 10.150 products
We deliver worldwide to
more than 40 countriesSecure payments
with SSL encryption technology
Unfortunately, this probably won't change in future.