Smooth-On XTC 3D Brush-On Coating, (A + B) = 181 g
Brush-on coating for 3D printed parts
Features & Advantages
- Protects & smooths 3D printing parts
- 90% time and cost saving
- Ideal for any 3D printing material
- Cost-effective in use
Item no.: KP-09400-010-000500, Content: 181 g, EAN: 751635696235
Product information & technical details
- Item no.: KP-09400-010-000500
- Manufacturer No.: 09400-010-000500
- Manufacturer: Smooth-On
- Content: 181 g
- Product type: Adhesive
Description
Brush-on coating for 3D printing models
XTC-3D® is perfect for smoothing your 3D printing models. The two liquids are mixed at a ratio of 2A: 1B and applied to the model. The application is best carried out using a brush. The resin smooths the surface and can be applied without visible brushstrokes.
The processing time is 10 minutes and the curing time about 4 hours (depending on the quantity and room temperature).
With the XTC-3D® your 3D models are impact-resistant and obtain a hard surface.
The model can then be sanded, primed and painted.
You can also add colour pigments or metallic powder to the mixture.
XTC-3D® is very inexpensive to use. For an area of 6.5 cm 2, only 30 g of XTC-3D® is required.
With XTC-3D®, you can coat all 3D printing materials, whether it be PLA, ABS, wood filaments or any other hard material used for 3D printing.
More information
XTC-3D® contains no VOCs (volatile organic compounds), phthalates or phosphates.
Please note the safety instructions in the manual.
Hazard and precautionary statements
Signal word: Warning
Precautionary statements:
- P261 - Avoid breathing dust/fume/gas/mist/vapours/spray.
- P280 - Wear protective gloves/protective clothing/eye protection/face protection.
- P302+P352 - IF ON SKIN: Wash with plenty of water/soap
- P333+P313 - If skin irritation or rash occurs: Get medical advice/attention.
- P362+P364 - Take off contaminated clothing and wash it before reuse.
- P501 - Dispose of contents/container according to local/national regulations.
Hazard statements:
- H315 - Causes skin irritation
- H317 - May cause an allergic skin reaction
- H319 - Causes serious eye irritation
- H411 - Toxic to aquatic life with long lasting effects
Signal word: Danger
Precautionary statements:
- P260 - Do not breathe dust/fume/gas/mist/vapours/spray.
- P280 - Wear protective gloves/protective clothing/eye protection/face protection.
- P310 - Contact your doctor/poison control centre immediately.
- P303+P361+P353 - IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
- P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P501 - Dispose of contents/container according to local/national regulations.
Hazard statements:
- H302 - Harmful if swallowed
- H314 - Causes severe skin burns and eye damage.
- H317 - May cause an allergic skin reaction
- H332 - Harmful if inhaled
- H361fd - Suspected of damaging fertility. Suspected of damaging the unborn child.
- H400 - Very toxic to aquatic life
- H411 - Toxic to aquatic life with long lasting effects
- EUH 071 - Corrosive to the respiratory tract.
Product videos:
Metallic Finish
Questions & Answers about Smooth-On XTC 3D Brush-On Coating
Customer Reviews
14 English reviews written for Smooth-On XTC 3D Brush-On Coating
136 customer reviews in all languages
| 5 stars | | 139 | (61%) |
|---|---|---|---|
| 4 stars | | 66 | (29%) |
| 3 stars | | 15 | (6%) |
| 2 stars | | 2 | (0%) |
| 1 Stars | | 3 | (1%) |
225 reviews
14 customer reviews in English
136 customer reviews in all languages
-
BD
August 27 2017
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. -
Martin
November 08 2018
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Review written by Martin
Rated with 4 out of 5 stars.
Easy to use, I mixed it using the weight ratio rather than the 2:1 by volume. I used it unthinned to fill in some large steps on a 3D print, it had bonded to the PLA material & did not peal even when sanded to a feather edge.
Was this rating helpful? (4) (0)
-
Richard
July 04 2018
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Review written by Richard
Rated with 5 out of 5 stars.
This product works extremely well. I have used this on my latest model on which I needed a perfectly smooth surface to finish off with a mirror like effect from silver spray acrylic paint onto PLA. Can barely see any layer lines left on the model printed at 0.1 resolution - very impressed.
Was this rating helpful? (1) (0)
-
Julie
May 10 2018
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Review written by Julie
Rated with 4 out of 5 stars.
Left my 3d prints looking better than they did before I applied it but not quite as effective at filling larger gaps as I had hoped - possibly just not the appropriate product for the job but otherwise it left the prints looking super smooth.
Was this rating helpful? (3) (0)
-
Keng
November 08 2019
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Review written by Keng
Rated with 5 out of 5 stars.
love this product!
Was this rating helpful? (3) (0)
Related products
Customers also bought
Magazine Articles:
-
Delivery in 3 business days.
More than 10.550 products
We deliver worldwide to
more than 40 countriesSecure payments
with SSL encryption technology
Lovely results (injection molded like)
Rated with 5 out of 5 stars.
what can I say.. it is the best smooth on acryl available.. very economic (you dont need much, but really you need VERY LITTLE) I always ended up with to much xtc3d, so used it on some small 3d prints I had.. once I was able to coat 3 pokemons with the leftovers of one print..
Was this rating helpful? (4) (0)